Foliar Stimulate is produced by combining natural plant growth regulators while adding organic carbons, natural occurring carbon bio-Lith, kelp, and seaweed. Foliar Stimulate has a broad label including corn, soybeans, vegetables, fruit and nut trees and more. Foliar Stimulate may be added to early foliar programs or as a stand alone product. Foliar Stimulate can also be applied through drip irrigation systems. To insure best performance, use Foliar Stimulate when there is adequate humidity, moderate temperatures and adequate soil moisture.
MIXING INSTRUCTIONS
Foliar Stimulate mixes completely in water with minimal agitation.
- Fill tank roughly ½ full of water and begin agitation.
- Add Foliar Stimulate to mix tank
- Add other pesticides and/or nutrients (be sure to check compatibility prior to mixing)
ATTENTION: Always check compatibility with other products prior to use.
APPLICATION RATES
Vegetables: 48 ounces per acre for sprinkler irrigated fields spray or dribble on the seed furrow at planting. For irrigated fields, flood irrigate directly below the seed row 1-2”. Use 15-20 gallons/acre. As a diluted with water if desired.
Corn, Cotton, Soybeans: Use 24 ounces /acre blended with a 20 gallons of H20/acre, when crop is under chemical and environmental stress apply 48 ounces/acre
Vegetable, Field Crops, Fruits, Fruit and Nut Trees: Apply 24 ounces per acre in 15 gallons of water/acre. Multiple applications may be useful. Use of Zap (replacement to a nonionic spreader/sticker) may enhance coverage and increase plant uptake. Do not apply more than 3 times per growing season. Do not apply when the crop is under severe stress. For best results, use the lowest possible volume that will ensure complete coverage and small droplet size.
Drip Irrigation (All Crops): Use 48 ounces per acre. Continue irrigation for at least 2 hours to insure adequate fertilizer coverage.
Corn, Sweet Corn, Small Grains, and Soybeans: Use 24 ounces per acre, mixed with 15-20 gallons of water per acre
| GUARANTEED ANALYSIS: | |
| Total Nitrogen (N) | 0.00% |
| Available Phosphoric Acid (P2O5) | 0.00% |
| Soluble Potash (K2O) | 0.00% |
Derived from: Humic acid, Alumic acid, Fluvic acid, Natural plant growth regulators, Kelp, Seaweed, and Bio-lith

U-TROUGH APPROACH



